What Is a Temporary Power Pole?
Think of it as a stand-alone utility panel on a post, built to feed a job site until the building has its own permanent meter. It holds the meter socket, a breaker panel, and grounding, all mounted on a pole set in concrete or a base. Contractors on Rancho Cordova sites use these constantly, since most permanent power inspections happen well after framing starts, and many pair the pole with a temporary power pole checklist review from OSHA Portable Toilet Requirements for the sanitation side of the same permit package. If your project also needs temporary fencing around the pole and panel for site security, that is worth scheduling at the same time as delivery. GFCI protection matters here too: OSHA 1926.404(b)(1)(ii) requires ground fault circuit interrupter protection on construction sites, and a temporary power pole is usually where that protection starts, right at the panel. We deliver these across Rancho Cordova and out to job sites in Mather, about 4.3 miles southwest, and Rosemont, roughly 9.0 miles west, with the full list on Service Areas.
How Much Does a Temporary Power Pole Installation Cost?
Installation cost depends on amperage, pole height, and how far the crew has to run from the utility connection point. A 200 amp pole costs more to install than a 100 amp pole, and rural sites with longer runs cost more than in-town jobs. We are not going to guess a permit fee or connection charge here, because those numbers vary by application and were not verified for this page; confirm current fees directly with the city before you budget the job. What we can size accurately is everything else on your site, from a portable toilet rental to a storage container rental for tools and materials.
| service | duration | typical range |
|---|---|---|
| standard porta potty | day | $100 to $350 |
| standard porta potty | week | $130 to $500 |
| dumpster (roll-off) | week | $426 to $778 |
| delivery fee | day | $100 to $500 |
Most crews renting a power pole also need a construction dumpster and a standard porta potty rental on site for the same inspection window, so we quote all three together when asked, and a porta john rental works just as well if that is the term you use. See porta potty rental cost, dumpster rental cost, or porta potty rental per day for full breakdowns.
Do I Need a Permit for a Temporary Power Pole?
Yes, in almost every jurisdiction, and Rancho Cordova is no exception; electrical permits and inspections apply to temporary power same as permanent service. We have not verified the exact permit process or fee schedule for Rancho Cordova here, so check with the city's building division before scheduling installation. What we can tell you: plan clearance around the pole so a roll-off dumpster delivery truck, which needs about 60 feet of straight clearance behind it, is not fighting for the same yard space as your electrical contractor. Site layout matters more than people expect on tight urban lots, and our porta potty placement guide covers the same clearance planning for restroom units.
Housekeeping also plays into inspections. OSHA 1926.25 requires scrap and debris cleared from work areas, and inspectors notice a cluttered site around electrical equipment. If your project spans months, look at a Monthly Porta Potty Rental instead of daily service, since crews on longer builds save by locking in the monthly rate rather than paying day rates the whole job, and a 20ft storage container or mobile office trailer rental covers the same long-haul logic for gear and job trailers. For sites in Gold River, about 7.5 miles north, or Fair Oaks, 10.0 miles north, we run the same delivery schedule as in-town Rancho Cordova jobs.
How long does a temporary power pole installation take?
Installation itself usually takes a day once the electrician has the panel and pole set. Inspection scheduling is the longer variable. Coordinate your request a quote submission early so pole delivery lines up with your electrician's calendar, not the other way around, and check our FAQ or Contact page if you need to adjust the schedule after booking.
What amperage do I need for a construction site?
Most residential and light commercial builds run 200 amp service, matching what the permanent meter will eventually carry. Larger commercial sites sometimes need higher capacity; ask your electrician to size it against your equipment load before ordering.
Can I rent a power pole without an electrician?
No. A licensed electrician has to install and connect the pole to meet code and pass inspection. We deliver and place the pole; wiring and hookup are the electrician's job, same as emergency septic service work needs a licensed pumper, not a general laborer.
Does the power pole rental include the meter?
Meter sockets are part of the pole assembly, but the utility company sets the actual meter after inspection passes. Confirm the utility's scheduling window separately, since that step is outside our control and outside the rental itself.
What else does a construction site need besides power?
Most sites need portable restroom rental sized to crew count under OSHA 1926.51(c), a dumpster, and often a handwashing station rental. Bundling all four with one delivery cuts down on separate truck trips to your site.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.